Arduino Based Attendance System Using RFID Tag


The main objective of this project is to record the attendance of students using RFID tags. Each student is provided with his/her authorized tag to swipe over the reader to record their attendance. 
In classrooms, time is wasted in roll calls as it is done manually. In this proposed system, authorized student is given an RFID tag. This tag contains an integrated in built circuit that is used for storing, processing information through modulating and demodulating of the radio frequency signal that is being transmitted. Thus, the data stored in this card is referred as the identification/attendance of the person.
Once the student places the card in front of the RFID card reader, it reads the data and verifies it with the data stored in the microcontroller from AVR family. If the data matches, then it displays a message on the LCD confirming the entry of that student else displays a message denying the attendance. The status of a student’s attendance can be retrieved from this system by pressing the status button interfaced to the microcontroller. Hence, a lot of time is saved as all the students attendance is directly stored in the data base.
The project can be further enhanced by adding features like sending an SMS of the daily attendance of students to their parents. It can also be enhanced by using a finger print module in place of RFID module that has certain drawbacks of tags be misused.



Comments

Post a Comment

Popular posts from this blog

IoT Based Contact less Tachometer with Speed Control Using AVR Microcontroller and Hall Effect Sensor

Image
ABSTRACT Tachometer is device used to count the revolutions per minute of a rotating shaft. Generally tachometer makes direct contact with the rotating shaft. It will reduce the velocity of the shaft, giving faulty readings. Hence it is needed to measure the speed of rotating shaft without direct contact. This project describes a contact -less tachometer using AVR microcontroller ATmega328P and a hall affect sensor. This device can very accurately measure the rotational speed of a shaft without even touching it. This device is built on an ATmega328P microcontroller, an alpha-numeric LCD module and a Hall Effect sensor to detect the rotation of the shaft whose speed is being measured. In this project Hall Effect sensor acts as a digital counting device. It will detect any magnetic element passing in front of it and thus, will give an output pulse for each and every rotation of the shaft. These pulses are fed to microcontroller. Microcontroller counts the pulses coming from Ha...
Read more

Power Line Carrier Communication Using X10 Protocol

Image
ABSTRACT Most   electric   power   companies   employs   power   meter reader   to   collect   data   on   the customer’s energy consumption. Usually, this task is carried out manually, which can lead to high cost and errors, causing financial losses. This project has taken some approaches to minimize these problems. As in everywhere automation is required to reduce the work so we decided to implement to automatic meter reading using power line communication (PLC). Automatic meter reading (AMR) is the modern Power measuring device. It has advantages in safety, real time measuring and time saving as well as it has a better user interface and digital data analysis. Data is   send   over   existing   power   line   using   X10   protocol   that   reduces   the   complexity   and   cost   of system. In the latest generation of home automation systems, appl...
Read more